Marine Deck Covering

For boat decks and marine coatings SANI-TRED® PermaFlex™ provides unparalleled service! On steel or wood boat decks, it's normally an extensive process to prepare for fairing and finishing. The time and expense of sand blasting or grinding to bright metal for proper bonding of other coatings is a very substantial process. Not so with PermaFlex™! PermaFlex™ is best applied upon light rusty surfaces after heavy rust scale has been removed by pressure washing with fresh water and allowed to dry.

Boat Deck Coating / Resurfacing

Step by Step Boat Deck Repair with Sani-Tred
 Prepping Prepped Bow Prepped Deck Prepping Deck

marine-deck-covering-17 marine-deck-covering-21 marine-deck-covering-31 marine-deck-covering-92

Spreading Granules  Masked Wash Down Finished Deck

marine-deck-covering-42 marine-deck-covering-51 marine-deck-covering-101 marine-deck-covering-112

Finished Deck Finished Deck Finished Deck Finished Deck

marine-deck-covering-61 marine-deck-covering-71 marine-deck-covering-141 marine-deck-covering-121

Finished Deck Finished Deck Finished Deck Finished Deck

marine-deck-covering-152 marine-deck-covering-161 marine-deck-covering-132 marine-deck-covering-82

A Simple 1-2-3 Fairing and Coating System

Prime with PermaFlex

Basic-4 Basic-6 LRB_TAV11

Flair with LRB / TAV Mixture


Top Coat with PermaFlex

Colorc2 Colorc4 Colorc6

Thanks to breakthroughs in polymer chemistry, a complete marine ship or work boat fairing and finishing system for pilot houses, decks, bilge areas, vertical or inverted surfaces is now available! Permanently repair corrosion damage and completely waterproof with SANI-TRED®. Give your boat a upgrade with a repaired, waterproof, and slip-resistant deck.




No other waterproof marine coating in the world can match SANI-TRED® because no other single component coating can preform like SANI-TRED®. SANI-TRED® products form a permanent molecular bond with most boat materials while remaining flexible enough to move with the surface to keep it water tight! Additional advantages are that the coating and repairs remain flexible, permanently bonded to the surface, and will expand and contract with the flexing of the vessel or withstand extreme temperatures and remain water tight! SANI-TRED® products are completely resistant to even concentrated salt brine, and will never detach, even at a raw edge. This unique system is both available and affordable for the individual boat, ship, or commercial vessel owner! Unlike paints or other temporary maintenance repair systems, SANI-TRED® is permanent and easy to repair if damaged! SANI-TRED® completely seals and smothers existing rust or corrosion and eliminates all future oxidation.

SANI-TRED® is the only waterproofing system that can repair and seal any salt or freshwater boat, deck, or bilge area, including vertical or inverted marine structures. SANI-TRED® products have saved many wooden, fiberglass, and steel marine components that were considered UN-repairable. If you feel that your boat is beyond hope, try SANI-TRED® and see what it can do.

If you have a vessel that is constructed with wood, fiberglass, ferro-cement, or steel you can easily and permanently transform your boat with SANI-TRED® Permanently eliminate regular painting, UV damage, crack and freeze damage, and lateral leaking with SANI-TRED®, the best marine coating on the market today.



NOTE: For all permanent marine installations, it is critical that all cement based "scrim coatings", old paints, sealers, waterproofing agents etc, must be removed to allow SANI-TRED® products to penetrate and bond to the original wood, fiberglass, or steel surfaces. SANI-TRED® LRB (Liquid Rubber Base), a single component polyurethane product, has the unique ability to cure at any thickness of application without gassing and molecularly bonds to itself new-to-old. SANI-TRED® PermaFlex™ penetrates the surface of your boat and creates a completely waterproof coating for any marine vehicle. These are just some qualities of the many qualities that set SANI-TRED® apart from comparable marine waterproofing and repair products.

Cracked, leaking, or damaged boats are permanently repaired with SANI-TRED®. With even major repairs and construction flaws faired, finished, and hidden by SANI-TRED® versatile and flexible qualities. Annual patching and repair is no longer necessary thanks to SANI-TRED®'s and its flexible liquid rubber coating. If the original SANI-TRED® surface is damaged, it is easily spot repaired without complete re-coating. If damaged, repairs weld to themselves, new to old, with a molecular bond which is unique to the coatings industry.

Simple and Economical Decorative Sculptured Designs For a Slip Resistant, Seamless, Easy to Clean Deck Surface

Protects Steel, Aluminum, Cast Iron, Etc., From the Corrosive Effects of Salt Water



Seals, Repairs, Rust-proofs and Coats All Deck Fittings & Flanges